Foam sets
in high-risk
environments
Foam sets and systems

Foam sets are often used for storage centres of businesses that use (large) amounts of hazardous substances. We offer Firepacks for water and foam concentrate admixture.

 

Electronic Foam Proportioner (EFP)

Foam sets and systems

Electronic Foam Proportioner (EFP)

Electronic Foam Proportioner (EFP)

The EFP is WB Firepacks patented product innovation. This unique, FM-certified system ensures the right dosage (amount, mixing ratio) of foam and water when extinguishing a fire. There is no loss of foam concentrate from testing, significantly reduced environmental damage and, as a result, substantially lower business costs. Visit www.efp.systems for more information.

Unique EFP characteristics:

  • No loss of foam from weekly/annual tests
  • Accuracy is within ± 0.1% of requirements
  • Admixture percentage is independent of the type of foam used
  • No loss of pressure to the water flow
  • Wide dosage parameters
  • Uses 24 V
  • In full stainless steel
  • FM-approved
Download more information
Twin firepack

Foam sets and systems

Twin firepack

Twin firepack

The Twin Firepack is a unique application for the use of both water and foam. Two different pumps are powered by a single diesel or electrical motor which, in addition to reducing costs and space requirements, results in greater reliability. This application is often used in the petrochemical industry, in tunnels, in hangars, and on offshore (drilling) platforms.

Specification Diesel

  • Motor: Diesel (water/foam)
  • Power: up to 1000 kW
  • Water pump: Capacity: 100 - 2000 m3/h / Pressure: up to 16 bar
  • Foam pump: Capacity: 0 - 100 m3/h / Pressure: up to 20 bar
  • Regulations: FM, NFPA, EN12845, CEA

Specification Electrical

  • Motor: Electrical (foam/foam)
  • Capacity: 100-200 m3/h
  • Pressure: up to 20 bar
  • Power: up to 200 kW
  • Regulations: NFPA, EN12845, CEA
Download more information
Foampack

Foam sets and systems

Foampack

Foampack

Is your environment characterised by the presence of flammable substances, such as petrol, diesel, or kerosine? Then a foam-based fire extinguishing system is the answer. Dousing the fire in a combination of water and a foaming agent shuts down its oxygen supply. Foam extinguishers are often used in the petrochemical industry, in tunnels, in hangars, and on offshore (drilling) platforms. WB Firepacks offers FM Approved foam pumps, guaranteeing the highest standards in safety and quality

Specification Diesel

  • Motor: Diesel
  • Capacity: 0-100 m3/u
  • Pressure: tot 20 bar
  • Power: tot 100 Kw
  • Regulations: FM, NFPA, EN 12845, CEA

Specification Electrical

  • Motor: Elektrisch
  • Capacity: 0-100 m3/u
  • Pressure: tot 20 bar
  • Power: tot 100 Kw
  • Regulations: FM, NFPA, EN 12845, CEA
Download more information
Electronic Flow Controller

Foam sets and systems

Electronic Flow Controller

Electronic Flow Controller

The EFC (Electronic Flow Controller) regulates an optimal foam dosage in your foam installation. Within 3 seconds there is an exact addition of foaming agent in the water flow. The main advantages are no pressure loss in the water flow and significant cost savings. The well thought-out design ensures that there is no loss of foam concentrate. In addition, the EFC is suitable for all types of foaming agent and subsequent change of the make, type and / or viscosity of foaming agent is possible. That makes the EFC of great added value to your foam installation.

Unique properties of the EFC

  • The correct admixture percentage within 3 seconds
  •  No pressure loss in the water pipe
  •  Self-monitoring
  •  Automated self-check every 24 hours
  •  Can be used for all types of foam
  • Testing without loss of foam
  •  It is possible to change the type of foam afterwards
  •  Subsequent change of admixture percentage possible
Download more information
Want to know more?

Want to know how WB Firepacks can help you? Feel free to contact us. We look forward to hearing from you.